13XAPG Molecular Sieve can remove impurities too larger to fit into a type A crystal and is commonly used to separate N2 from O2. 13X APG Molecular Sieve is the sodium form of the type X crystal and has a much larger pore opening than the type A crystals. It has the highest capacity of common adsorbents and excellent mass transfer rates.

Main parameter:

Diameter(mesh): 8*12 ;  4*8

Static adsorbed water(≥ %wt): 27;  27  

Adsorption of CO2(≥ mg/g):185;  185      

Bulk density(≥ g/ml): 0.65;  0.64        

Compressive strength(≥ N): 30 ;  70

Abrasion ratio(≤ %wt): 0.1;  0.1

Residual moisture content(≤ %wt): 1.5;  1.5

Application field:

13X-APG molecular sieve is widely used in the cryogenic air separation industry, especially in the cryogenic air separation purification system to remove H2O and CO2 to avoid the freezing tower phenomenon in the cryogenic process. In addition, it is also used for general gas drying, drying of air compression systems and the medical field. In industry, 13X-APG molecular sieve is often used to remove H2O and CO2 from the air, and is suitable for cryogenic air separation devices of various sizes.

Storage and packaging

13X APG molecular sieve should be stored at room temperature and relative humidity not more than 90%, avoid direct exposure to air to prevent moisture absorption or dampness. There are various packaging methods, including 25KG cardboard barrels or bags, 25KG or 30KG paper barrels, 50KG or 150KG iron barrels, etc.